نتایج جستجو برای: High-temperature abrasion
تعداد نتایج: 2385423 فیلتر نتایج به سال:
in this thesis, a better reaction conditions for the synthesis of spirobarbiturates catalyzed by task-specific ionic liquid (2-hydroxy-n-(2-hydroxyethyl)-n,n-dimethylethanaminium formate), calcium hypochlorite ca(ocl)2 or n-bromosuccinimide (nbs) in the presence of water at room temperature by ultrasonic technique is provided. the design and synthesis of spirocycles is a challenging task becaus...
Selective solar absorbers (SSAs) with high performance are the key to concentrated power systems. Optical metamaterials emerging as a promising strategy enhance selective photon absorption, however, high-temperature stability (>500 °C) remains one of main challenges for practical applications. Here, multilayered metamaterial system (Al2O3/W/SiO2/W) based on metal-insulator-metal Fabry-Pérot res...
The piston ring which prepares mechanical sealing of a combustion chamber, should have significant abrasion resistance and less friction loss, using appropriate ring coating. The coating widely used is CrN, because of its good abrasion resistance at room temperature. However, it suffers from some shortcomings, such as high abrasion rate at temperatures above 200°C and lack of self-lubricating p...
This work considers use neurofuzzy set theory for estimate abrasion wear resistance of steels based on chemical composition, heat treatment (austenitising temperature, quenchant and tempering temperature), hardness after hardening and different tempering temperature and volume loss of materials according to ASTM G 65-94. Testing of volume loss for the following group of materials as fuzzy data ...
Abrasion dusts from three types of commercially available non-steel brake pads were generated by a brake dynamometer at disk temperatures of 200, 300 and 400 1C. The number concentration of the abrasion dusts and their aerodynamic diameters (Dp) were measured by using an aerodynamic particle sizer (APS) spectrometer with high temporal and size resolution. Simultaneously, the abrasion dusts were...
Understanding the formation and exhumation of the remarkable ultrahigh-pressure (UHP) rocks of the Western Gneiss Region, Norway, hinges on precise determination of the time of eclogite recrystallization. We conducted detailed thermal ionization mass spectrometry, chemical abrasion analysis and sensitive high-resolution ion-microprobe analysis of zircons from four ultrahighand high-pressure (HP...
The deep cryogenic treatment is a complementary operation that is done on a variety of tool steels aimed at improving their abrasion resistance and hardness. In the case of the H13 hot-work steel, which is widely used at high temperatures as a hot-deformation tool, we need to determine the efficiency of subzero treatment on it at the working temperature. In this regard, this paper is focu...
the thermally stimulated discharge (tsdc) current is studied for acrylonitrile butadiene rubber (nbr) loaded with different high abrasion furnace carbon black (haf). tsdc peak appears only for higher haf contents > 60phr (70 and 80phr of haf contents), the tsdc spectra consist of a sharp peak corresponding to a peak temperature tm which is slightly shifted to higher temperature for 70phr ...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید